Tubing Pressure and Casing Packer Specifications

The Tubing Pressure Packer is designed to handle a variety of downhole needs. The packer may be run in tension or compression.

The Casing Packer can be set in open hole or in the casing string.

Deeply cut, widely spaced wickers allow the packer to set, whether it is in open hole or in corroded casing. The Casing Packer is also available for open holes with a softer dual packing element system. This system provides a more reliable pack-off in irregular formations and a trouble free release without swabbing. Also available with safety release for tension set.

• The Tubing Pressure Packer is used for acidizing, fracturing, and water injection, but only where moderate pressure is expected. It has found frequent application for shutting off leaks in injection wells.
• The Casing Packer is often run beneath casing holes to isolate water so the well can be pumped or gas vented. The packer can be set in tension or compression for shutting off water, for injection orfor various cementing procedures. When run in compression and in conjunction with special release sub, the packer can be used as a liner hanger.

• Full opening casing size
• Deep cutwickers
• Compression or tension set
• Casing can be run below packer
• Available in open hole version

Click here for larger image.